How To Install A Bathtub On A Concrete Floor

Installing a new bathtub is an performance that requires a lot of attention and precision if y'all make up one's mind to do information technology yourself. After carefully choosing the tub that is suitable for our needs and the most suitable indicate of the bathroom for its placement, it volition be necessary to remove the old tub and install the new one, making sure to connect in the all-time mode all its functional parts.

Here are the main steps on how to install a bathtub on physical floor

Removal of the former bathtub

Before installing the new bathtub, the sometime 1 must be disassembled . To avert flooding information technology will be necessary offset of all to close the water supply and to have a large bowl to comprise the residual water in the pipes which, during the operations, could come up out.

To remove the erstwhile tank information technology volition be necessary to cut the old adduction pipes , the overflow pipes and the bleed, with the assist of a saw suitable to cutting the metals.

Depending on the textile of which it is equanimous, the tank can also be removed later on being crushed with the help of a society.

This operation is possible, for example, for cast atomic number 26 tanks ; in this instance, nonetheless, yous must protect yourself by wearing the appropriate protective spectacles and noise-proof headphones.

Choice of the new bathroom

There are various types of bathtubs ; earlier buying i information technology is important to have clear ideas on which type of tank is within reach of the spaces that are available.

The main models are:

– Rectangular tanks

They are the most common and widespread ones as well as the most economical ones.
The dimensions vary from 1.4 to 1.eight meters in length and with only 2 widths of your choice, that is from 70 or 80 cm.

– Corner

This type of tanks take up a lot of space and are therefore suitable for very large bathrooms. They are equipped with a wide range of toiletries and accessories.

– Circular tanks

Although extremely spectacular, these pools are certainly not amid the well-nigh widespread but if we intend to blueprint a big bathroom with considerable dimensions , then a beautiful round tub in the center of the room would be the platonic protagonist around which to rotate the remaining furnishings.

DIY installation of the bathtub

Earlier installation : laying the tiles on the wall precedes the installation of the tank. Earlier proceeding, cheque that the role of the not-tiled wall exceeds the overall dimensions of the tub in height and width, and then that the tub adheres to the plaster and not to the tiling.

Once the old bathtub has been dismantled, yous can kickoff to prepare the floor and the wall to accommodate the new one.

Both, in fact, must be made waterproof. For example, a tiled floor ensures good watertightness, while for the wall it is necessary to apply a primer and a product that ensures a watertight seal.

Subsequently, the dimensions of the tank should exist shown on the wall as a guide for installation. At this point, we can offset assembling the pool tools.

If this is equipped with feet , you will need to install them by starting the fixing holes of the supports present on the feet themselves, with the help of a drill, and so prepare them with a screwdriver.

– Nosotros put the new piping (D) of adduction or connect the branches of the new pipes to the existing ones (I) and so every bit to be prepare for connection to the hoses already continued to the taps.

– We insert two wooden boards under the feet of the tub in order to better distribute the concentrated loads on a larger surface.

– Ready the tank in position and arrange the level horizontally past intervening with the key on the feet.

– At present we connect the flexible pipes (D) to the pipe and the frazzle pipe (G) to the siphon (H)and finally all the way to the existing branch on the drainage cavalcade.

It is of import to think that when the tank is installed against the walls information technology is difficult to brand joints and connections. The faucets, the overflow and the siphon must first be installed and then the tank pushed into identify.

​
The drain and the overflow

Drain in the bathtub

Gather the drain and overflow unit (Eastward) . If the filler type is used, the overflow must be connected earlier the siphon, whereas in the siphon type, the plastic pipe is connected to the siphon.

Insert the pipe in the pigsty of the tank (Chiliad) taking intendance to wrap the teflon tape around the threaded cavalcade.

From below we add together the plastic gasket and tighten the fixing nut by pressing the filler on the mastic or on the gasket.

We connect the siphon of the tank to the drain pipe and the overflow pipe (Eastward) to the relative hole of the tank.

Installation of the faucets for the bathroom

Once this is done, you lot tin install the faucets of the tub with the hoses. If the taps are on the edge of the tank, information technology will be advisable to drill, using a pigsty saw, the betoken where the tap will be placed.

Bath tub faucets
​
If the faucets are single (A) and then the assembly is the same as those for the sink. Insert the taps of the taps into the holes (B) provided for the tank, insert the gaskets and tighten the nuts by blocking them.

We connect the copper hoses to the floor lamps. The mixers are mounted similarly merely almost all accept the long seal to be placed under the taps.

The choice of the faucets or the mixer is completely subjective. The mixers are bachelor with a shower organization, either mounted on the mixer or hung on armrests fixed to the wall above the bath.

Renew the quondam bathroom

If the old steel tank is not to be thrown away, then we can renew it by cleaning the surface with clammy rags of turpentine and so every bit to eliminate traces of grease.

So, nosotros tin paint the tank starting from the bottom upwardly in a circular management using a special two-component glaze.
​
For professional finishes it is necessary to contact specialized companies that bear out spray enamelling.

Source: http://www.surreyplumbingpros.com/how-to-install-a-bathtub-on-concrete-floor/

Posted by: woolfevently.blogspot.com

Share this post